Anatomy of a WurliTzer Theatre Pipe Organ

XYLOPHONE - Small scale

This version has the bars held in place with a pin through one end and a metal strip over the top each side. (The second strip not yet fitted) There are other styles, like the standard scale version on Opus 1730, that have the bars sitting between the pins on each side held in place only by strings through horizontal holes in the bars just outside the guide pins. This version has the advantage of being able to be handled without the bars falling out of position.

The felt strip usually found under the bars is replaced by rubber tubing which has greater resiliance and less damping. Surgical silicon tubing would be better but none of the correct size was available at the time. The rubber should last a few years and can be easily replaced when it goes hard.

Felt under the metal strips stops any extraneous noises when the bars bounce after being struck. There is a gap between the bars and the felt so that no damping occurs.

HOME

This page brought to you by:
VintageHammond.Com - We Buy-Sell-Trade Vintage Hammond Organs and Roll or Kari Organ/Vending Machine Moving Dollies Order Roll or Kari Dollies Here